Our Trusted. 24 x 7 hours free delivery!

voodoo lab 2 plus manual

The Voodoo Lab Pedal Power 2 Plus is a premium power supply designed for guitar effects, offering reliable and consistent power to multiple pedals simultaneously. Known for its high-quality construction and advanced features, it is a favorite among professional musicians. With eight isolated 9V outputs, it ensures noise-free operation and supports pedals like Boss, Line6, and others. This unit is built to meet the demands of touring and studio environments, delivering stable power for optimal performance.

Overview of the Voodoo Lab Pedal Power 2 Plus

The Voodoo Lab Pedal Power 2 Plus is a high-performance power supply designed to meet the demands of professional musicians. It offers eight fully isolated 9V DC outputs, ensuring reliable operation for a wide range of guitar effects pedals. Each output is short-circuit protected, filtered, and regulated to maintain consistent power delivery. This unit is compatible with pedals from manufacturers like Boss and Line6, making it a versatile and essential tool for any pedalboard setup.

Importance of Reading the Manual

Reading the manual for the Voodoo Lab Pedal Power 2 Plus is crucial to ensure proper setup and operation. It provides detailed instructions on connecting pedals, using specialized cables for 18V and 24V effects, and troubleshooting common issues. The manual also outlines safety guidelines to prevent damage to your equipment and ensures compliance with safety standards. By understanding the features and limitations, users can maximize the unit’s performance and avoid potential risks associated with improper usage.

Key Features of the Voodoo Lab Pedal Power 2 Plus

Eight isolated 9V outputs, high-current capability, and support for 18V and 24V effects make it versatile and reliable for powering a wide range of guitar pedals;

Eight 9V Outputs for Guitar Effects

The Voodoo Lab Pedal Power 2 Plus features eight 9V DC outputs, each designed to power a wide range of guitar effects pedals. These outputs are fully isolated, ensuring that each pedal receives clean, stable power without interference or noise. This isolation is crucial for maintaining the integrity of your tone, as ground loops and hum are effectively eliminated. Additionally, two of the outputs are high-current, making them ideal for pedals with increased power demands. This flexibility allows musicians to power everything from classic overdrives to modern digital effects, all from a single, reliable unit.

Isolation, Short-Circuit Protection, and Regulation

The Pedal Power 2 Plus excels with advanced isolation, short-circuit protection, and regulation. Each 9V output is fully isolated, preventing ground loops and hum, ensuring silent operation. Short-circuit protection safeguards pedals from accidental wiring issues. Regulation maintains consistent voltage, protecting sensitive electronics from power fluctuations. These features combine to provide a stable, noise-free power supply, critical for maintaining optimal pedal performance and reliability during live performances and studio sessions.

High-Quality Construction and Reliability

The Voodoo Lab Pedal Power 2 Plus is renowned for its robust construction and unwavering reliability. Built with premium materials and designed for durability, it ensures long-lasting performance. The all-metal chassis provides excellent protection against damage, while high-grade components deliver consistent power. This unit is trusted by professional musicians for its dependable operation in both touring and studio environments, making it a cornerstone of any pedalboard setup. Its reliability ensures uninterrupted performance, even under demanding conditions.

Unpacking and System Components

The box includes the Pedal Power 2 Plus unit, warranty card, AC power cord, DC power cables, and manual. All components ensure reliable pedal operation.

What’s Included in the Box

The Voodoo Lab Pedal Power 2 Plus package includes the main power supply unit, an AC power cord, multiple DC power cables with right-angle and straight connectors, a red barrel connector cable, a 3.5mm mini plug, a warranty card, and a detailed user manual. These components ensure comprehensive support for various pedal configurations and provide clear instructions for setup and operation.

Understanding the Power Indicator and Outputs

The Voodoo Lab Pedal Power 2 Plus features a power indicator LED that lights up when the unit is operational, ensuring power is supplied to your pedals. The eight 9V DC outputs are isolated, short-circuit protected, and regulated to prevent noise and interference. Each output is designed to deliver clean power, with two high-current outputs for pedals requiring more energy. The LED indicator provides visual confirmation of the unit’s status, while the outputs ensure reliable performance across all connected effects.

Connecting Your Pedals

Connect your pedals using DC power cables, ensuring proper polarity and voltage matching. Specialized cables are available for 18V and 24V effects, ensuring reliable power delivery.

Using DC Power Cables

To connect your pedals, use the provided DC power cables, ensuring proper polarity and voltage. The unit includes 5.5×2.1mm right-angle and straight barrel connectors for standard pedals. For high-current effects, use the red 5.5×2.5mm cable. Always match the correct cable type and voltage to your pedal’s requirements to avoid damage. Ensure secure connections to maintain reliable power delivery and minimize noise. Proper cable management prevents tangles and ensures a clean setup. Follow the manual’s guidelines for optimal performance and safety.

Specialized Cables for 18V and 24V Effects

The Pedal Power 2 Plus supports 18V and 24V effects using optional voltage doubler cables. These specialized cables allow you to power pedals requiring higher voltages, such as certain overdrive or fuzz effects. Simply connect the appropriate cable to the 9V output, and the unit will deliver the required voltage. Always ensure compatibility and follow the manual’s instructions to avoid damage. This feature enhances versatility, making the Pedal Power 2 Plus suitable for a wide range of pedal configurations and voltage requirements.

Operating the Voodoo Lab Pedal Power 2 Plus

Operating the Pedal Power 2 Plus is straightforward. Connect your pedals using the provided DC cables, ensuring correct polarity. Power on and enjoy reliable, noise-free performance.

Powering Boss, Line6, and Other Pedals

The Voodoo Lab Pedal Power 2 Plus seamlessly powers Boss, Line6, and other pedals. Boss pedals typically require a standard 9V DC connection, while certain Line6 models may need specific cables for proper operation. The unit’s isolated outputs ensure clean power delivery, minimizing noise and hum. For optimal performance, always use the correct DC power cables provided and verify the voltage requirements of your pedals before connecting them to avoid damage.

Ensuring Reliable Operation

For reliable operation, use the correct DC power cables and ensure all connections are secure. Avoid overloading the outputs, as this can cause performance issues. Regularly inspect cables for damage and replace them if necessary. Keep the unit clean and away from excessive heat or moisture. Always refer to the manual for specific voltage requirements and guidelines. Proper usage ensures optimal performance and extends the lifespan of both the Pedal Power 2 Plus and your pedals.

Troubleshooting Common Issues

Check connections and ensure proper voltage for each pedal. Inspect cables for damage and verify output isolation. Consult the manual for solutions to noise or power issues.

Eliminating Noise and Hum

To eliminate noise and hum, ensure all connections are secure and use the correct DC power cables. Isolated outputs prevent ground loops, reducing hum. Regularly inspect cables for damage and avoid electromagnetic interference from nearby devices. Proper voltage matching and maintaining the power supply’s cleanliness also help minimize noise issues for reliable operation.

Addressing Short-Circuit and Overload Problems

The Voodoo Lab Pedal Power 2 Plus features built-in short-circuit protection to safeguard your pedals and the unit itself. In case of an overload or short circuit, disconnect the faulty pedal and cycle the power supply. Ensure pedals are within the current rating of their respective outputs. Regularly inspect cables for damage and avoid using incompatible adapters to prevent such issues. This advanced protection ensures reliable operation and protects your equipment from potential damage.

Safety Guidelines and Precautions

Always use the correct AC power cord and avoid improper usage to prevent damage. Ensure the unit is disconnected when not in use for safety.

Compliance with Safety Standards

The Voodoo Lab Pedal Power 2 Plus adheres to UL STD 60065 safety standards, ensuring safe and reliable operation. It is designed to meet international regulations for electronic devices, providing protection against electrical hazards. The unit is constructed with high-quality components to prevent overheating and electrical faults. Proper usage, as outlined in the manual, is essential to maintain safety and prevent damage to the device or connected pedals. This compliance guarantees a secure and efficient power supply solution for musicians.

Proper Usage to Avoid Damage

To ensure optimal performance and prevent damage, use the Voodoo Lab Pedal Power 2 Plus as instructed in the manual. Always use the provided DC power cables or compatible replacements to avoid overvoltage or short circuits. Keep the unit in a well-ventilated area to prevent overheating. Avoid exposing it to moisture or extreme temperatures. Never modify the device or cables, as this could lead to electrical hazards. Regularly inspect cables and connections for wear or damage. Proper usage ensures long-term reliability and safety for your pedals and power supply.

Comparing with Other Voodoo Lab Models

The Pedal Power 2 Plus stands out for its advanced features and reliability, making it a top choice among musicians compared to other Voodoo Lab models.

Differences Between Pedal Power 2 Plus and Other Models

The Pedal Power 2 Plus distinguishes itself with eight isolated 9V outputs, two of which are high-current for power-hungry pedals. It offers superior noise reduction and reliability compared to the Pedal Power ISO-5. The 2 Plus supports optional voltage doubler cables for 18V and 24V effects, making it more versatile. Its advanced filtering and regulation ensure consistent power delivery, setting it apart as a premium choice for professional musicians seeking stable and quiet operation.

User Reviews and Feedback

Professional musicians praise the Pedal Power 2 Plus for its reliability and noise reduction. Many consider it the best power supply for their MXR and Origin Effects pedals.

Musician Testimonials and Experiences

Professional musicians and guitarists widely praise the Voodoo Lab Pedal Power 2 Plus for its exceptional performance. Many highlight its ability to power a wide range of pedals silently and reliably. Users often mention how it eliminates noise and hum, ensuring clean tones. Some have noted its durability and reliability during tours and gigs. The unit is frequently described as a must-have for both studio and live setups, particularly for those using high-end or vintage pedals like MXR, Origin Effects, and Analogman. Its reputation as a studio-grade power supply has made it a favorite among tone-conscious players.

Maintenance and Warranty

Regularly clean the unit and ensure proper ventilation to maintain performance. The Voodoo Lab Pedal Power 2 Plus comes with a comprehensive warranty covering manufacturing defects and repairs.

How to Maintain Your Pedal Power 2 Plus

To maintain your Voodoo Lab Pedal Power 2 Plus, regularly clean the unit with a soft cloth and avoid exposure to moisture or extreme temperatures. Inspect DC power cables for damage and replace them if necessary. Ensure proper ventilation to prevent overheating. Avoid overloading the power supply, and always use the provided AC power cord. For storage, keep the unit in a dry, cool place. Refer to the manual for specific care instructions to ensure optimal performance and longevity of the device.

Leave a Reply